Ombré du Soleil

They just wanted to be made. – Elle

I had posted these on instagram the other day, just a small macro shot, and immediately got requests to see more. Well, the thing about that is that these are ridiculously difficult to photograph for one simple fact – they are huge.

detail3

A couple years ago, when we were still in California, I had an overseas collector send me a great number of stones to sell on consignment. That’s the reason my etsy shop was initially opened. There were a handful of stones that I knew immediately that I didn’t want to sell – I wanted to create something with them.

My starting point in this particular project was the largest pair of spessartites. They just glowed, in an almost unearthly way, with this ridiculous neon orange that photos don’t really do justice, as orange is one of the hardest colors to photograph accurately.

2

Now, this collector had sent along literally about 40 carats of spessartites, including a handful of smaller round oranges with fantastic color, and a pair of bezeled round spessartite earrings.

studs2

Spessartite, as with most gemstones and colors, goes through bursts here and there of popularity and trendiness. Unfortunately, just as I got this package, spessartite was hitting a slow spot, so most of the loose gems that I had never even hit the market. Instead I started to have big dreams for them, all brought upon by the incredible color of that large pair. I created a sketch of the initial idea, which included using the bezeled studs as is and then later amended it to add a few details, involving a change to the stud.

light2

About six months ago I went to visit my favorite gem shop and one of the first things on my mind to pick up were gems that would fit the ombré  color scheme I had dreamed up.  I needed to find exactly the right graduation of color and size to match cohesively with the overall concept. Luckily I was able to find that in some sapphires from Madagascar.

garnets-and-sapphires

As soon as I had all of the stones collected, I sent the picture to a friend.
all-stones
And a couple months later, she asked me when I was going to make the earrings? Why hadn’t I made them already? I had all of these beautiful stones, why not make use of them already? So I turned around that week, and sent them off to the jeweler, along with a picture of the sketch.
sketch
As I mentioned before, the sketch went through a couple of revisions. The final version ended up being so large that the entire thing wouldn’t fit on one page of my sketch book, so I had to improvise a little bit, and drew the stud separately from the rest of the earring. A quick note: I draw everything at 5x scale.
stud-sketch
middle-part-sketch
bottom-part-sketch
 So, lets talk specifics of the finished product.
all-stones2
The bottom 5 stones are spessartites, the top three in the bottom section are sapphires. The top stone (the stud) is a spessartite and then the rest (second stone in the stud and then the little connecting section) are all fancy yellow diamonds.
detail
detail9
These are definitely more hefty than I usually make, but the one thing I wanted out of these is that I wanted to have that heft, and I didn’t want them to feel cheap. I feel like they easily could have gone the costume jewelry route, but the setter managed to avoid it, keeping the walls between the stones quite thin, and the edges from stone to outside rim thin in most areas . The largest stones are 7mm and very deep so we really had to have a lot of metal to hold them all in place.
detail15
The settings are open in the back to let in a ton of light, even though they are bezeled. The emphasis for this project was really on the stones, the ombré effect and the concept of light. Seeing as how it took about two years to find the right stones in the right sizes, tones and saturation to I really wanted to not detract from the concept as a whole and keep the ombré effect in the metal that’s holding the stones together. As you will see in the images below, the color of the stones change from one image to another – the most accurate devices for color viewing are Apple products, iphone, ipad, Mac computers, and images with the brightest colors and least amount of brown are the closest to real life.
detail7
done7
done11
done

14 grams of 18kt yellow gold

.16 carats of yellow diamonds
.41 carats of yellow sapphires
14.13 carats of orange garnets

14.7 total carats

They measure just over 2.5 inches long.

done6
done10
done14 earshot

Everyone keeps asking me, “why did you make these? Are they for yourself, or to sell?” and my answer has been, “They just wanted to be made.”

At the moment, I don’t know what the future holds for them. But absolutely something bright.

Elle signature

Advertisements

Engaged: 3 Stone Spinel

Sometimes the best projects are the most terrifying. Warning – this post is picture heavy!

2

A while back I had a new client come to me and she said, “I don’t know what I want, but really like the Accolade band, and a few other settings. Can you design my engagement ring?” To which I said yes.

4

Looking back on it, I think it’s kind of funny because being given full creative control is so so scary, but her engagement ring turned out wonderfully and I couldn’t be happier.

5

We had a lot of debate over stones, but once the actual setting idea came into fruition, it all seemed to fall into place.

6

It was made using three precision cut spinels – the center is a lavender spinel, and the two side stones are gray spinels.

7

Platinum ended up being the metal of choice due to it’s lack of maintenance.  The random polish to smooth out scratches, and it looks as good as new again!

8

The angled shoulder view is often my favorite on any ring, but on this ring, it’s extra special – I love how the prongs and the curves just flow together!

9

Last rays of summer sun…

3

12

Once you see the profile, you can clearly see how it was inspired by the Accolade band!

1

E, I am absolutely delighted for you and D, and I hope that this ring follows you through many great adventures on your life together!

Elle signature

Gem Blast: Vivant Earrings

If you follow me on social media, you’ve seen these earrings before. They have been all over Instagram, Facebook, and Snapchat.

Inspired by the Vivant necklace, I got the idea when I found these incredible step cut cushion Mahenge spinels, and had to put them together. I then paired them with a pair of Mahenge round brilliant spinels that I had purchased years ago, tweaked a few details to make the combination of stones work together and elongate the shape to flatter the wearer, and added a post back.

A

Showing off a bit of their red fluorescence in the sun.

B

Looking a bit blue, reflecting the sky in the stones.

Some of the finer details:

F
E

Mahenge spinel, diamonds and 18kt white gold.
2.40ctw spinels, .30ctw diamonds, 2.70ctw total stone weight.

close up
D

Finding a pair of spinels is exceedingly difficult because the stones in general are so rare, but to find some that are the same color, size, shape and cut magnifies to difficulty level thousandfold. Finding two pairs that go together and match on color isn’t exactly easy either, and often is a matter of waiting until the right stone or stones comes around.

H up close

Now, the next time you see them, they will be a bit different. A client took a liking to them, but wanted them changed just a touch, and asked me to make the alterations.  I can’t wait to see them when they are done!
Elle signature

A Diamond Papillon

The Papillon was my first official foray into creating a stock jewelry line. I spent so many hours agonizing over slight details and figuring out the best way to make those details come together in a cohesive manner. The Papillon was the result and I am still quite proud of it.

2

So I wasn’t surprised to get a message asking if I would be amenable to adapting it to a marquise shape and turning it into an engagement ring.

12

Due to it’s split shank style, it was a simple adaptation from an oval to a marquise, and one that worked out wonderfully.

4

Yellow gold was chosen and it was just a matter of getting it set.

1

C & J, I hope that this ring is shared through many incredibly happy years, and that you enjoy it for a long time to come. I am so delighted that you asked me to adapt a design to your stone and so lucky to have shared a small piece of your history together!

13

Elle signature

One of a Kind

I spent the last week in Albuquerque, New Mexico – the place where I was born and raised. Taking almost an entire week completely off from jewelry and getting back to my roots, spending time with family and friends was one of the most refreshing things I could have done at this point and it gave me some new perspective on things that I’d been dwelling on and feeling stagnant on for too long. I guess that standing in the middle of a thunderstorm in the mountains will help do that to you.

IMG_3440

One of the things that I enjoy the most about gemstones is that they are all unique and one of a kind. Sure, you can get some that look similar to others, but they will always have unique characteristics, whether it’s in the form of color, inclusions, cut, whatever. No two are identical.

34

Working with various colored stone vendors has shown me that I’m not alone in loving gems for this very reason – colored stones are always so different, and sometimes they can totally surprise you with what you fall in love with.

9

So this, my most recent blog, and the first blog in a long time is an ode of sorts to the one of a kind, and an indication on where I am heading creatively. I’m going to take a step back from feeling like I’m treading water coming up with stock designs, and taking a flying leap into the water and swim like my life depends on it – making pieces as unique as the stones they hold.

6

More to come.

Elle signature

Inside the Industry: Engagement Rings

I originally was thinking of the “Real Housewives of _____” series when I had this idea for the blog. I’ve never actually watched even an episode of any of the shows, but their jewelry seems to have a prominent presence in the show, as I will occasionally hear about various huge diamond engagement rings from news outlets.

Engagement rings are deeply personal items, sometimes they have hidden messages, birthstones, special secrets that just the couple knows about. Every engagement ring is a promise and a symbol of a union, and are often the most important piece of jewelry a couple will share.

So I decided to reach out to some gem cutters and dealers to see what people wear who are surrounded by stunning gems and jewelry all of the time.

All photography within this post is the property of person whose ring it is, and their images and stories are being used with permission.


Dan and Cynthia Stair of Custom Gemstones met when Cynthia started collecting the gemstones that Dan was cutting.

Dan Stair2

What is Cindi’s engagement ring?
About a four carat pink sapphire in a platinum and diamond halo. The funny thing is, I bought the ring to take the stone out and recut it, but was told “no”. I figure if it ever gets a little scuffed, I’ll “fix” it.


Roger and Ginger Dery of Spectral Gems

Roger Dery2
Roger Dery

What is Ginger’s engagement ring?
Blue sapphire, Sri Lankan, a piece I reconditioned with a final weight of 6.33ct. It is heated, and has an AGL report, of course.


Geoffrey and Alexandra Watt of Mayer & Watt

Geoffrey Watt
Geoffrey Watt2

What is Alexandra’s engagement ring?
3.50cts 8.5mm square cushion peach no heat Padparadscha Ceylon sapphire with white gold shank … Rose gold head … Platinum filigree down the side with 3mm round Alex’s. Her anniversary band is rose gold with diamonds, and the ring was designed so the band would fit inside it.

Why Alexandrites?
Well I love Alexandrites and so my wife by default likes them too, and wanted a big one but we can’t afford it! So I promised she would eventually get one…and I put them secretly in her ring. She designed it but I snuck them in. Plus her name is Alexandra, so it has double meaning behind it being in her ring.

Jaimeen and Nattalie Shah of Prima Gems

Nattalie ering4

Nattalie ering5

What is Nattalie’s engagement ring?
A 1.5ct round tsavorite and diamond ring. The center measures 6.6mm.

Nattalie and Jaimeen’s engagement ring story is so wonderful, I just had to let her share it in her own words:
Almost six years ago, my husband (who was obviously my boyfriend at the time) called his mother in India and asked her to design and make a ring for me. He asked her to make a ring with a Tsavorite because this stone holds a lot of significance to him. He knew that I had teased him that I would love any engagement ring as long as it wouldn’t turn my finger green (haha). I love my engagement ring and I really feel that it’s so special to know that this ring was made just for me.


If you’re in the business and would like me to share a photo of your/your partner’s engagement ring please reach out to me!

Thank you so much to all of you for sharing such a special piece of your history together!

Elle signature

Custom Red Burmese Spinel Halo Ring

I’ve been incredibly busy, to say the least!

I actually took my first day off in three weeks renovating/decorating/etc the other day to exclusively work on jewelry stuff. I had been sorely missing it and really had a stack of things to get back on – gemstone photography, rough jewelry ideas, blog ideas, sketches (which I’m still behind on!), as well as giving my back a rest, as I had pulled it over a week ago.  So I’m feeling as though I’m in a much better place than I was last weekend, with getting some items that were way overdue taken off my list.

I have a few fancy shaped antique diamonds in queue to design custom rings around, and I’m really excited about those. And of course I have some colored stone custom designs in the works as well!

In the meantime, I wanted to share some images of the most recent design to come out of production, something reaching quite a ways outside of my comfort zone, which I often struggle with, but always comes out better than I could imagine.

1
Sketch, slightly underdeveloped.

spin804
spin800
Jeweler’s photographs. 

_36682
img_11074
Client’s photographs.

I always love when clients come up with something that’s out of the ordinary, and this certainly fits the bill in that regard! An unconventional diamond and platinum halo surrounds a 1.69 ct Burmese Red Spinel.

I will be sending a parcel of sapphires and an emerald to AGL for certification this week. I had been intending to send them to AGL and kept putting it off for various reasons. But they are going to go now, and typically they are at about a 2.5 week wait, so hopefully I will have them back relatively soon.

I have been working on some stock items, and as per usual, the CADs came out perfectly the first time for both items. Both share elements with the Vivant and as such, I decided to use Mahenge spinels as them as well. I can’t wait to see them completed!

Elle signature