Engagement: Alli & Doug

I’m still not really sure how Alli and Doug found me, but they did and I’m absolutely delighted that they did. Otherwise I wouldn’t have had a part in this gorgeous ring, which would have been terrible.

img_0012

Back in the Fall of 2016, Alli and Doug reached out and asked if I would be interested in making their engagement ring. They had bought a gray spinel, and had several items of family jewelry that they wanted to use the stones from. If you’ve followed me at all, you already know how into an idea I am if it has a gray spinel attached to it. But I was intrigued both by the couple and their design ideas, as well as the center stone!

img_0014

They expressed later to me how difficult it had been to find a jeweler to execute their vision for their ring, and I can sort of understand why because it’s not conventional, and there really aren’t that many jewelers who are willing or want to take on an unusual request. Especially for a gemstone. I am honored to be asked to create this beauty for such a special sentimental ring!

img_0016

So they sent along some guides as to what they wanted their ring to look like, with some examples of each one, and we went back and forth on lots of the details for a long time, trying to iron out each element.

img_0018

They wanted the gray spinel to take main stage from top down, and not have any of the accent stones visible from the top down. They wanted double prongs (which is always a stability concern for me with cushion cut gems! Double prongs are always best for cushions!) and an antique feel.

img_0028

They wanted engraving, pretty much all over. They wanted Alexandrite accent stones in various places on the profile. They wanted diamond accents in other places. They wanted to use diamonds from an antique family ring. They wanted it to have the feel of an antique.

img_0031

Luckily their requests came with a stone that was large enough that we could add a lot of detail and still manage to hide everything under the stone.

img_0046

I had to play with proportions of everything, but at one point, everything just flowed together with all of the inspiration photos they had given me, every element that they had asked for, and my own little flourishes.

img_0062

They had me add their birthstones, an amethyst and a garnet plus an alexandrite into the shank, against her skin.

img_0065

img_0068

A view of the tucked under family diamond, detailed with accents inspired by a 1950s birthstone ring that belonged to my mother. This shows it alongside a gray gold Accolade band.

img_0095

A bit of an idea of what it looks like on the hand with a quick handshot from yours truly!

img_0116

One of my flourishes, and Alli and Doug still don’t know this, is that when I was thinking about the project, I was strongly inspired by Alli and felt that she had a certain kinship with Wonder Woman. As a result, I mimicked Wonder Woman’s tiara shape in the profile of Alli’s ring, which you can see best when it’s upside down.  Alli is an athlete and a dentist (technically a prosthedontist) and those are just the tips of the iceberg when it comes to describing how gifted this woman is!

img_0121

I love how this ring looks slightly different from every angle.

img_9956

A closer look at the family diamond we bezel set on the shoulders of the ring.

img_9966

You know I cannot resist a gray spinel, especially a giant one like this! Once Alli saw that I had started to offer gray gold as an alternative to the traditional white, she jumped on the bandwagon immediately, and I think it came out incredibly well, and suits the stone perfectly.

img_9984

And to finish off, a couple macro photos on an antique beaded purse. When Doug surprised Alli with the ring, he turned off all of the lights because I had sent it in a ring box with a light in it, and she was really confused why he was turning the lights off, until he opened the box!

img_9988

When the ring was completed, I emailed Doug, and I told him that if he trusted me, he should just let me send the ring, and forgo seeing pictures of it beforehand. He did, and this blog entry would be the first time he would see the photos I had taken!

img_9991

Doug & Alli, it was my utmost pleasure to work with you and I hope that we can work together again in the future! Enjoy that stunner of a ring and congratulations again on sharing your life with each other!
Elle signature

Advertisements

The Résilient in Photographs

I’m doing a photo heavy and commentary light post because I have too much on my to do list, but I still wanted to share the beauty of this ring with you, and I haven’t been able to put a blog out about it yet.

img_0339
img_0361
img_0420
img_0427
img_0526
img_0537

The center stone is a Amora Moissanite cut into the OEC pattern, and all of the other stones are diamonds. The Amora Moissanite has been discontinued, which, after seeing it in person, is a real shame. They have replaced it with the Forever One Moissanite, and the OEC cutting is also nowhere to be found.

img_0538
img_9022

img_9082
img_9100
img_9132

Sometimes, through great times of turmoil, comes great beauty.

img_9179

Elle signature

The Rose Cut

I have a serious crush on rose cuts. But if you’ve been following any of my media for any period of time, you’ll have noticed this. There are rose cuts in two of my necklace designs, with the Ingenue being primarily based around the rose cut, they feature prominently in my Pétiller profile, and have even made an appearance in some of my custom designs. If they were easy to find, and I had unlimited funds, ALL OF THE ROSE CUTS WOULD BE MINE. Ok, so that’s not necessarily true, but I do love them, and I wish I could buy a lot more than I do.

celeste

So the reason I’m writing about this today is because I’m a bit neurotic. Recently a client of mine bought some “hexagon rose cuts”, and she asked me why when I said they weren’t rose cuts. So this is a bit of an analysis of what a rose cut is, using the hexagon diamonds as an example of how to discern what isn’t a rose cut, and what is just a fancy marketing gimmick.

A lot of what designates a rose cut is the intent of the cutter.

Did the cutter intend for it to be traditionally cut, and the stone wasn’t shaped well? Or did the cutter actually intend to cut a rose cut?

img_7142

Facet Diagrams & Facet Structure

Rose cuts were often used as accent stones in antique jewelry. They have a simplistic cut that is a flattish dome, with triangular facets arranged in a hexagonal pattern, with a point on top. There is not a flat table facet on top of the stone, and there is no pavilion, the way Old European Cut or Modern Round Brilliants are cut. Rose cuts are typically round, but can be found in other shapes, such as pear, cushion, oval, etc.

Equiangular Hexagon

I am particularly strict in my evaluation of rose cut diamonds, and I insist that they have the equiangular triangled hexagon on top. Sometimes, especially with modern cut specialty shaped rose cuts, the hexagon will be elongated to mimic the outline of the stone.  Like this modern cut pear:

rose-cut-pear

It’s still a rose cut, but the facet structure is a clue that it’s not antique!

Lack of a Pavilion

It’s easy to get confused with terminology for rose cuts, since they don’t follow the same cutting guidelines as traditionally cut stones. I tend to think of them as a traditionally cut stone that has had the pavilion cut off at the girdle, but with a point on the table instead of the table being flat.

img_7115

One of my very first gemstones was a peach spinel that had a rose cut table and crown, but with a traditional pavilion. Sometimes I miss that stone!

Faux Rose Cuts

Now, one of my biggest pet peeves has been popping up more and more lately and that’s taking a poorly, but traditionally cut stone (with a table, pavilion, culet, etc), flipping it over so it’s culet and pavilion face up with the table facing down, and calling that a rose cut. It is not a rose cut. You can determine these stones by looking at the facet structure, and seeing whether or not it is totally flat on the flat side, if it has a crown, and if the facets are almost equiangular AND triangular. Here is a helpful diagram to help illustrate the anatomy of a traditionally cut stone can look like.

You can see a comparison between the hexagonal traditional cut on the left, and the classic rose cut on the right. I can tell a few things from the hexagonal stone about the rough  – the stone wasn’t deep enough to cut it to ideal specifications and have optimal light return when it’s table up. So in a clever marketing move, they flipped it over and marketed it as a “hexagonal rose cut”.

img_4858

With these hexagonal stones, they were not originally intended to be rose cuts, and that is obvious once you take a closer look at the pavilion facets:

img_4861

They have the equiangular center facets, but if you look closer, the facets that aren’t in the center are trapezoidal in shape, rather than triangular.

Interestingly, when I flip the stones over, and have the table/flat side up, you can see the huge difference, and clearly discern what the original intent of the cutter was. The hexagons show light return bouncing off the pavilions, minus the windowing in the middle, while the rose cut is essentially transparent:

img_4867

Double Sided Rose Cut

Double sided rose cuts are very rare, and are often given different names, depending on the knowledge of the seller or owner. As you can see from the diagrams above, they are structured as if two rose cuts were put flat side against flat side.

Rose cuts come in all different flavors, and they’ve been enjoying a sort of resurgence into popularity with celebrity interest in them as well as antique jewelry coming back into fashion. You can expect to see more from me as well, but that is mostly due to my everlasting love for them, rather than following the trends!

Side note: Thanks to Jennifer Aniston for giving the rest of us some giant rose cut goodness to ogle when she’s out and about.  (Yes, her engagement ring is a giant rose cut diamond!)

Elle signature

Updates and an Announcement

I feel like it’s been a while since I blogged. And there are a lot of good reasons for that. But I’ll get to that in a bit.

img_6765

I recently nabbed a trio of gray spinel asschers. I’m thinking about making a three stone with them, if they match well enough and look good together. I will see once they arrive! If I don’t love them together, they will probably go into the etsy shop.

img_8392

I did several earring design sketches for a client, and I’m considering turning some of the unused ones into designs to go into the etsy shop. Especially since I have a ton of green garnets that really should be used for something fabulous.

img_8649

Upcoming projects: a necklace for a friend, a Rubellite ring, a smattering of three stone rings, a five stone ring, a couple of fancy halos, and a handful of solitaire rings. Plus who knows what else will pop up in the next few weeks.  I have several ideas for necklaces that I’d like to make, but those may take a while to bring into fruition.

img_7177

The biggest announcement is that I have taken an outside opportunity, and as a result, I won’t be able to devote as much time as I have been to my own jewelry design.  There won’t be a ton of changes that stem from this change, my website will stay the same, my stock designs will remain available, the Etsy shop will remain open, and I will still be available to do custom design.

img_7433

The big changes are going to be: I won’t be able to devote as much time to hunting down gemstones and I’m going to have to be stricter about custom projects that I take on. I will still have accounts with Gem2000, Mayer & Watt and Pala International/Gems, and their stones will be available for purchase through me. Shipping will only happen once a week, probably Mondays or Tuesdays. Unfortunately, blogging will have to take more of a backseat, and will likely turn into a once a month occurrence. I will still try to respond to emails within 24 hours, but I may not be as swift as I was before.
Elle signature

Gem Blast: Holiday Edition

It has been a crazy week, with a family birthday plus Thanksgiving and then ten completed projects when I was expecting 5, plus a bunch of gems.  I have more on the way, and with the holidays gearing up, things are just bound to get crazier!

So this week, I’m just going to post a handful of my favorite pictures that I’ve been taking in the past couple of weeks! Some of this will be a preview for new items to come – some will probably hit etsy before they get to the website, due to holiday shopping demands

edit3
img_9352
img_8663
img_6449
img_7588
img_8462
img_8926
img_9280
img_9305
img_9341
img_9371

Be on the lookout for new things to come! For additional pictures of some of these pieces, check out my Repertoire page.  And don’t forget to check out Facebook for all of my etsy promo codes.(Hint: there is one for today! After all, it’s Cyber Monday!)

Elle signature

Hand Forging vs. CAD and Cast

 I feel like the topic of different ways to manufacture jewelry has been coming up more and more lately in email conversations with clients, so I figured I’d write a little bit about it.
*Please note, I’m not going to discuss die struck jewelry in this post!
done14
I think it’s Mark Morrell that was a touch snarky about answering the question of “are your items handforged?” I believe his answer is along the lines of “I use the best manufacturing method for the job at hand.” Which, to me, says loads – it says that he thinks the question is hogwash, he uses both “methods”, and isn’t going to waste a lot of time molding metal to make a ring that could be manufactured easier and quicker through other means.
In reality, all jewelry is made by jewelers manipulating a variety of tools through a variety of techniques to get the desired result.
It seems to me that there has been a big fuss about what tools and techniques are used to achieve those results.
b
Now, there are obvious differences in production, but there is very little that can be produced “better” via “hand forging” vs CAD and cast. CAD and cast is easier, it’s cheaper, and the time savings is tremendous as far as labor goes. CAD and cast are also typically going to be more precise and symmetric. A computer and a machine just aren’t going to make the mistakes that a human would. The differences boil down to how the parts of the jewelry were created. Otherwise, there is a ton of overlap in the methods. Hand forged items, if you’ve watched videos, have been brought into their shapes with tools and a person guiding those tools. No matter what, the pieces are all soldered on the same way, they are all polished the same way, the seats for the stones are all cut the same way. Engraving is done the same way. You get the idea.
Feel free to mute your sound should you choose to watch the video!
I have a Mark Morrell piece in my personal collection, and what I can tell from it is that his finishing is impeccable. You can tell that he goes over every millimeter until it’s to his standards. The ring is CAD and cast, though I have no doubts that he uses hand forging methods when necessary. I have played with a 100% hand forged piece and I can see solder where the band was put together, the prongs on the center stones are all different lengths and widths, and one doesn’t quite touch the stone correctly, causing it to catch on things and have constant chunks of fuzz under it.
1
Mark Morrell set with a colorless spinel
For me, it becomes a question of, “Do I want this cheaper, quicker and easy to replicate? Or do I want this to cost 5x as much, imperfect, longer manufacturing times, and not easily replicated?”
Petiller
My Pétiller ring is one that’s good to think about because it’s quite simple in execution, and was cast. The cast pieces were assembled by hand, and then the seats were hand carved out of the solid metal for each diamond. The only difference in making that ring via hand forging vs CAD and cast is that the methods would be different to get the solid shank, and the bezels that make up the support structure between them. Otherwise, the methods to put it together are exactly the same.
Petiller shoulder
My stance is that I prefer CAD and cast over hand forging. Much of the manufacturing methods are the same, it’s just a question of how the metal came to be the finished shape before things like setting stones and other finishing techniques take place. CAD and cast is much easier, especially when it comes to online orders – the client gets to see what it’s going to look like before it’s produced, rather than just hoping it will come out how it’s been envisioned, and seeing it when it’s finished.
17
So much of the jewelry world is incredibly secretive. I don’t think that most jewelry people like to take time out to explain the differences to laypeople, especially when it’s hard to gauge the audience – are they really wanting to know the specifics behind the manufacturing methods or is it just a question being asked to make small talk? And sadly, most sales people in the retail world have no idea about manufacturing methods at all.
Elle signature

Incoming Gemstones

Whoa! Gemstones ahoy!

I got a couple of packages from a couple of collectors looking to consign items, and there are some really awesome gems, and a couple of finished jewelry pieces.

14658274_952413324847_1071752736_n

Some of the stand outs include:

40+ carats of green garnets: tsavorite, demantoid, mint, including melee!
2+ carat blue spinel pear
1.89 carat neon pink spinel
Green zircon
6+ carat blue zircon
Light teal-blue tourmaline
Pink Vietnamese spinel
Ruby studs
Handful of diamonds, rounds and cushions
Precision cut Mahenge garnets
Lavender tourmaline

Plus more!

unnamed1

Also expected this week, a precision cut gray spinel antique cushion with a certification from AGL.

And I still have more incoming in the next couple weeks!

All of these will be listed to my etsy shop in the coming weeks, while I’m hoping to have everything up by Thanksgiving, but that just depends on how things go, and how much sun I get for photographs! If you are looking for anything in particular or if any of the above sound interesting, please reach out to be added to the interest list!

14741061_952418604267_1737135236_n

If you haven’t found my coupon code on my Facebook page yet, you should go check it out because it expires October 31!

Also I have accounts with some wholesale dealers, so if you’re looking for anything in particular, let me know!

2

We are getting very close to the holiday season. I will be releasing deadlines for holiday ordering within the next week – where has this year gone?! I cannot believe the holiday season is upon us!

So many custom projects going into production right now, I am so excited to see them come to fruition!

Elle signature