Ombré du Soleil

They just wanted to be made. – Elle

I had posted these on instagram the other day, just a small macro shot, and immediately got requests to see more. Well, the thing about that is that these are ridiculously difficult to photograph for one simple fact – they are huge.

detail3

A couple years ago, when we were still in California, I had an overseas collector send me a great number of stones to sell on consignment. That’s the reason my etsy shop was initially opened. There were a handful of stones that I knew immediately that I didn’t want to sell – I wanted to create something with them.

My starting point in this particular project was the largest pair of spessartites. They just glowed, in an almost unearthly way, with this ridiculous neon orange that photos don’t really do justice, as orange is one of the hardest colors to photograph accurately.

2

Now, this collector had sent along literally about 40 carats of spessartites, including a handful of smaller round oranges with fantastic color, and a pair of bezeled round spessartite earrings.

studs2

Spessartite, as with most gemstones and colors, goes through bursts here and there of popularity and trendiness. Unfortunately, just as I got this package, spessartite was hitting a slow spot, so most of the loose gems that I had never even hit the market. Instead I started to have big dreams for them, all brought upon by the incredible color of that large pair. I created a sketch of the initial idea, which included using the bezeled studs as is and then later amended it to add a few details, involving a change to the stud.

light2

About six months ago I went to visit my favorite gem shop and one of the first things on my mind to pick up were gems that would fit the ombré  color scheme I had dreamed up.  I needed to find exactly the right graduation of color and size to match cohesively with the overall concept. Luckily I was able to find that in some sapphires from Madagascar.

garnets-and-sapphires

As soon as I had all of the stones collected, I sent the picture to a friend.
all-stones
And a couple months later, she asked me when I was going to make the earrings? Why hadn’t I made them already? I had all of these beautiful stones, why not make use of them already? So I turned around that week, and sent them off to the jeweler, along with a picture of the sketch.
sketch
As I mentioned before, the sketch went through a couple of revisions. The final version ended up being so large that the entire thing wouldn’t fit on one page of my sketch book, so I had to improvise a little bit, and drew the stud separately from the rest of the earring. A quick note: I draw everything at 5x scale.
stud-sketch
middle-part-sketch
bottom-part-sketch
 So, lets talk specifics of the finished product.
all-stones2
The bottom 5 stones are spessartites, the top three in the bottom section are sapphires. The top stone (the stud) is a spessartite and then the rest (second stone in the stud and then the little connecting section) are all fancy yellow diamonds.
detail
detail9
These are definitely more hefty than I usually make, but the one thing I wanted out of these is that I wanted to have that heft, and I didn’t want them to feel cheap. I feel like they easily could have gone the costume jewelry route, but the setter managed to avoid it, keeping the walls between the stones quite thin, and the edges from stone to outside rim thin in most areas . The largest stones are 7mm and very deep so we really had to have a lot of metal to hold them all in place.
detail15
The settings are open in the back to let in a ton of light, even though they are bezeled. The emphasis for this project was really on the stones, the ombré effect and the concept of light. Seeing as how it took about two years to find the right stones in the right sizes, tones and saturation to I really wanted to not detract from the concept as a whole and keep the ombré effect in the metal that’s holding the stones together. As you will see in the images below, the color of the stones change from one image to another – the most accurate devices for color viewing are Apple products, iphone, ipad, Mac computers, and images with the brightest colors and least amount of brown are the closest to real life.
detail7
done7
done11
done

14 grams of 18kt yellow gold

.16 carats of yellow diamonds
.41 carats of yellow sapphires
14.13 carats of orange garnets

14.7 total carats

They measure just over 2.5 inches long.

done6
done10
done14 earshot

Everyone keeps asking me, “why did you make these? Are they for yourself, or to sell?” and my answer has been, “They just wanted to be made.”

At the moment, I don’t know what the future holds for them. But absolutely something bright.

Elle signature

Designing Accolade

I have had a rough week, first I burned my hand while using a heat gun (remodeling) and then when I went to go to bed on Friday night, I thought it felt a bit cold…it was 60 in our house instead of the usual downright tropical 70. Turns out that the heater went out on us, and the heating company isn’t open until Monday. So I’m writing this blog from one of two reasonably not-freezing cold rooms, draped in blankets with a space heater humming away. Thank goodness we still have electricity!

As a result of all of the remodeling (and painting!) I’ve been doing lately, I have barely been wearing any of my jewelry, so I wanted to write about one of my favorite and most popular pieces: the Accolade band.

I often get asked what my biggest seller is, and I would have to say that it’s my Accolade band. I feel like there are a lot of women out there right now who are stacking so many fantastic rings and accenting their engagement rings or any rings with really fun bands, and the texture and versatility of the Accolade certainly lends itself to adding interest to any stack.

Top
The CAD of the flat version.

It originally started out as just a doodle. I had been thinking about all of the writers and word smiths in my extended family, and thought about how pretty the curves of the braces are (curly bracket, curly braces, squiggly bracket, etc) and I really wanted to make something inspired by them. I initially was interested in making it into a halo shape. If you hadn’t noticed, I’m particularly into making halos with unconventional shapes, evidence here, here, here and here.

2

But then as I doodled one day, after the Glacé was made, I realized that if you flip the brace on it’s side, and then alternate it facing upwards and downwards, it created a beautiful series of waves with alternating curves and points. Later, as I studied architectural arches for another project, I would discover the Ogee arch – very similar in shape to the brace, further solidifying my instincts that found the shape beautiful.

3

The flat version was made first, but I had it high polished and plain for the first prototype. While lovely, I thought that it really needed something to add a little bit of dimension and depth to the piece, while not distracting from the lines of the band. So I added milgrain because I thought that the band would go exceptionally well with the outline of the Exalteé halo. But as soon as I had laid eyes on the high polished flat version, I knew that a curved version needed to be made as well, this time with a brushed finish.

4

They are so perfect to add just a little bit of texture with some negative space, and make wonderful wedding bands as well.

My fingers are crossed that I can get back to wearing jewelry soon enough (maybe once I’m done painting?) and one of these bands will be something I reach for first. The Accolade band is available through David Klass Jewelry in many styles and textures, even with diamonds or gemstones!

Are there any questions you’ve ever wanted to ask a gemstone cutter but were afraid to ask? Feel free to submit any questions you may have through me, and they may get answered in an upcoming feature by a wonderful lapidary!

Also, a note: I just renewed a bunch of listings in my shop on etsy! I’m planning on adding a few items there, hopefully this week, including a fancy colored diamond ring, and a red spinel and diamond ring. Feel free to reach out if you’d like to be added to the interest list for either item!