The Résilient in Photographs

I’m doing a photo heavy and commentary light post because I have too much on my to do list, but I still wanted to share the beauty of this ring with you, and I haven’t been able to put a blog out about it yet.

img_0339
img_0361
img_0420
img_0427
img_0526
img_0537

The center stone is a Amora Moissanite cut into the OEC pattern, and all of the other stones are diamonds. The Amora Moissanite has been discontinued, which, after seeing it in person, is a real shame. They have replaced it with the Forever One Moissanite, and the OEC cutting is also nowhere to be found.

img_0538
img_9022

img_9082
img_9100
img_9132

Sometimes, through great times of turmoil, comes great beauty.

img_9179

Elle signature

Advertisements

Ombré du Soleil

They just wanted to be made. – Elle

I had posted these on instagram the other day, just a small macro shot, and immediately got requests to see more. Well, the thing about that is that these are ridiculously difficult to photograph for one simple fact – they are huge.

detail3

A couple years ago, when we were still in California, I had an overseas collector send me a great number of stones to sell on consignment. That’s the reason my etsy shop was initially opened. There were a handful of stones that I knew immediately that I didn’t want to sell – I wanted to create something with them.

My starting point in this particular project was the largest pair of spessartites. They just glowed, in an almost unearthly way, with this ridiculous neon orange that photos don’t really do justice, as orange is one of the hardest colors to photograph accurately.

2

Now, this collector had sent along literally about 40 carats of spessartites, including a handful of smaller round oranges with fantastic color, and a pair of bezeled round spessartite earrings.

studs2

Spessartite, as with most gemstones and colors, goes through bursts here and there of popularity and trendiness. Unfortunately, just as I got this package, spessartite was hitting a slow spot, so most of the loose gems that I had never even hit the market. Instead I started to have big dreams for them, all brought upon by the incredible color of that large pair. I created a sketch of the initial idea, which included using the bezeled studs as is and then later amended it to add a few details, involving a change to the stud.

light2

About six months ago I went to visit my favorite gem shop and one of the first things on my mind to pick up were gems that would fit the ombré  color scheme I had dreamed up.  I needed to find exactly the right graduation of color and size to match cohesively with the overall concept. Luckily I was able to find that in some sapphires from Madagascar.

garnets-and-sapphires

As soon as I had all of the stones collected, I sent the picture to a friend.
all-stones
And a couple months later, she asked me when I was going to make the earrings? Why hadn’t I made them already? I had all of these beautiful stones, why not make use of them already? So I turned around that week, and sent them off to the jeweler, along with a picture of the sketch.
sketch
As I mentioned before, the sketch went through a couple of revisions. The final version ended up being so large that the entire thing wouldn’t fit on one page of my sketch book, so I had to improvise a little bit, and drew the stud separately from the rest of the earring. A quick note: I draw everything at 5x scale.
stud-sketch
middle-part-sketch
bottom-part-sketch
 So, lets talk specifics of the finished product.
all-stones2
The bottom 5 stones are spessartites, the top three in the bottom section are sapphires. The top stone (the stud) is a spessartite and then the rest (second stone in the stud and then the little connecting section) are all fancy yellow diamonds.
detail
detail9
These are definitely more hefty than I usually make, but the one thing I wanted out of these is that I wanted to have that heft, and I didn’t want them to feel cheap. I feel like they easily could have gone the costume jewelry route, but the setter managed to avoid it, keeping the walls between the stones quite thin, and the edges from stone to outside rim thin in most areas . The largest stones are 7mm and very deep so we really had to have a lot of metal to hold them all in place.
detail15
The settings are open in the back to let in a ton of light, even though they are bezeled. The emphasis for this project was really on the stones, the ombré effect and the concept of light. Seeing as how it took about two years to find the right stones in the right sizes, tones and saturation to I really wanted to not detract from the concept as a whole and keep the ombré effect in the metal that’s holding the stones together. As you will see in the images below, the color of the stones change from one image to another – the most accurate devices for color viewing are Apple products, iphone, ipad, Mac computers, and images with the brightest colors and least amount of brown are the closest to real life.
detail7
done7
done11
done

14 grams of 18kt yellow gold

.16 carats of yellow diamonds
.41 carats of yellow sapphires
14.13 carats of orange garnets

14.7 total carats

They measure just over 2.5 inches long.

done6
done10
done14 earshot

Everyone keeps asking me, “why did you make these? Are they for yourself, or to sell?” and my answer has been, “They just wanted to be made.”

At the moment, I don’t know what the future holds for them. But absolutely something bright.

Elle signature

My Office

If you have been following me for a while, you will have noted that I dropped the ball for a while and didn’t blog or have many jewelry updates. Well, that was due to the fact that I was moving offices. For some time we were about 30 minutes outside of town, and this spring, we finally finished renovations. I don’t know that my office will ever be actually finished, per se, but I feel like it’s a good start and definitely functional! I consider my office to be a very personal space and I’ve been a bit reluctant to share a space that I’ve spent so much time creating and creating in. But people ask, so I thought I’d share a bit about it, with pictures of some of the details.

amethyst
Catching rainbow inclusions in my amethyst paperweight, macro.

Furniture

I have no fewer than 5 parts to my desk. There is no way that I could manage with a traditional desk, because I really like to have everything in plain sight when I work. I also have multiple jobs that I have to fulfill, and my desk set up has to reflect that. Each desk has a primary function, and other secondary and tertiary functions. I have an antique desk for photography and storage, a drafting table, a shelving unit, an antique table for miscellaneous items (typically items being shipped out or notebooks and paperwork), and a desk for my laptop and photography. This doesn’t include another shelf that stores books and items that aren’t necessarily used every day or a small silver table that is home to a cobalt blue lamp.

curtains

Color

Of course I had to choose the color of my walls carefully. Since most of the surfaces of my office area are dark wood, I had to keep it light and airy. The walls are two different shades of a light cornflower blue, one color is so light that it almost appears white depending on the sun’s position, while the other is a couple shades darker. The curtains are a medium silvery gray – reminiscent of brushed white metal. Silver accents abound! Two silver tables, a chrome and black leather chair, silver frames for almost every picture, and a eclectic mix of modernity and antiquity.

wall decor

Lighting

My office has one large window that looks out to roses, flowers and fruit trees. It is also, most importantly, south facing. So no matter what, unless it’s rainy and cloudy, my office is completely flooded with natural light. When picking the space, this was absolutely crucial considering how many photos I can take on an average day. However, I also have several lamps – a couple decorative lamps with incandescent lightbulbs, an Anker Lumos LED lamp (which is awesome because it has several different colors of lights that it displays), as well as a magnifying fluorescent lamp, and thats not even counting the actual ceiling lights!

Anker light

Details

Of course I wanted to surround myself with items that are not only beautiful but also calming, inspiring, functional and of things I love – family, friends, and deeply sentimental items.  I have a Pricescope “diamond” paperweight that I got from a JCK event, an amethyst crystal paperweight that was a gift from my husband, and a paperweight that was a gift from my dad when I got my first job out of college. I have a “Diamond Terrarium” in copper from Lonesome Hobo, that sits on my antique desk that is beautiful and functional – I use it to store rings for short periods, as a photography backdrop, and as a object to stare at sometimes.

Terrarium

Picture frames with loved ones are all over, as well as two Angie Crabtree prints – the “Dominique” and “Elle” and the centerpiece of the decor is an antique mirror that my mother once designed an entire luxe bathroom around (it had this incredible beeswax Venetian plaster on the walls, among other things.) I have a “wall of women” – it holds both of my diplomas, a stunning photograph of my grandmother with her hair grazing her derriere sitting at a dressing table and a picture of my mother’s family – she was the youngest of ten. I also store pens, pencils and markers in a piñon wood bowl that has inlaid turquoise – a gift from an old boss, that represents so much and is a good reminder of home, New Mexico.

turquoise pen cup

I hope you enjoyed seeing some of the details that I look at every day!

Elle signature

A Day in the Life

Have you ever wondered what a day looks like in my life? Today is the day to find out!

3

7:00-7:15am Do a preliminary check of my email and social media to see what might be coming my way for the day.

7:15am Get my daughter dressed, fed and ready for the day.  I’ve recently weaned myself off coffee, and it’s been absolutely brutal.

8:00am See my husband and daughter off to work and school/camp.

8:15am A thorough check of emails, start planning the day.  If it’s a Monday, I write a bit on Facebook for the blog post, mentioning any big things that have been going on, designs I’m working on, sales etc.

9:00am Take photographs of gems and jewelry, depending on what the sun is doing. During the winter months, it’s almost always overcast, so sun is a precious commodity!

10:00am Respond to email.  Post to social media, usually instagram.

10:30am Post new items to etsy, edit photography, write descriptions for items while eating lunch – often yogurt, unless I’m feeding my daughter too, which means I will eat something more substantial.

22

12:00pm Shipments usually arrive around this time. If I’m not expecting anything, I will probably ship items.

1:00pm Work on new designs, or incomplete designs that need to be revised and finished.

4:45pm Stop working on designs, start thinking about family time and dinner.

6:00pm Dinner time! I often recruit my daughter to help me cook, which for a 4 year old means stirring. She is an excellent stirrer!

1

7:00pm Play time. Sometimes I will try to post to social media here and there, but I usually reserve this time to spend with my family.  Often we will go for a walk if it’s light out, or watch something on the Food Network (my daughter’s favorite shows are Chopped and Cutthroat Kitchen because she likes eliminating people), or just play with toys.

8:00pm Get my daughter’s bath time and bedtime routine started.

9:00pm Do a final email check for the day, post to instagram. Tuesday is usually my blog writing night.

9:30pm Watch tv shows or a movie with my husband, I tend to continue checking social media throughout (while he is checking his email!), and might post to SnapChat. Some favorite shows range from Game of Thrones, Better Call Saul (and Breaking Bad!), Homeland, UnREAL,  Arrow, Once Upon A Time, among others.

11:30pm Hit the sack. I’m usually lucky to make it to 11:30 without falling asleep. Every once in a while I manage to stay up past midnight, but it has become more rare lately.

12067814_10153514808980081_1187860179_n

I mentioned that I will post to FB about my sales – I am running a sale for the month of August, and you have to check my Facebook posts for the coupon code!

Elle signature

A Diamond Papillon

The Papillon was my first official foray into creating a stock jewelry line. I spent so many hours agonizing over slight details and figuring out the best way to make those details come together in a cohesive manner. The Papillon was the result and I am still quite proud of it.

2

So I wasn’t surprised to get a message asking if I would be amenable to adapting it to a marquise shape and turning it into an engagement ring.

12

Due to it’s split shank style, it was a simple adaptation from an oval to a marquise, and one that worked out wonderfully.

4

Yellow gold was chosen and it was just a matter of getting it set.

1

C & J, I hope that this ring is shared through many incredibly happy years, and that you enjoy it for a long time to come. I am so delighted that you asked me to adapt a design to your stone and so lucky to have shared a small piece of your history together!

13

Elle signature

The Vivant Ring

One thing I sometimes struggle with is keeping it simple. Sometimes I find myself adding details and thinking, “This is perfect!” and then going back and thinking, “Why did I add so much?!” I always try to remember that Coco Chanel quote:

“Before you leave the house, look in the mirror and take one thing off.”

Wise words from an impeccably fashionable woman. So while the Vivant necklace is a modern take with Art Deco appeal, I decided to keep the Vivant ring an echo of some of the details from the necklace, and lend towards classic simplicity.

proportions2

The stones chosen for this setting were chosen to add a little bit of drama via color, with a neon pink Mahenge spinel, and two antique Old Mine Cut cushions (because antique cuts in diamonds are my favorites!) as the perfect classic accents.

profile
Typically one of my favorite views, because it shows off so many details of a ring setting, and how they flow together. 

profile2 ring

The ring ends up at 2.64ctw of diamonds (antiques are .99ctw, melee are .10ctw) and spinel (1.55ct) and was made of 18kt white gold. This setting will be available (and tremendously adaptable!) for your own stone or stones, of any shape and size. I am also able to source stones, because pairs are not exactly easy to find sometimes!

shank split shank2

And ending with the fluidity of the shank, and the slight split shank transition.

Elle signature

Custom Red Burmese Spinel Halo Ring

I’ve been incredibly busy, to say the least!

I actually took my first day off in three weeks renovating/decorating/etc the other day to exclusively work on jewelry stuff. I had been sorely missing it and really had a stack of things to get back on – gemstone photography, rough jewelry ideas, blog ideas, sketches (which I’m still behind on!), as well as giving my back a rest, as I had pulled it over a week ago.  So I’m feeling as though I’m in a much better place than I was last weekend, with getting some items that were way overdue taken off my list.

I have a few fancy shaped antique diamonds in queue to design custom rings around, and I’m really excited about those. And of course I have some colored stone custom designs in the works as well!

In the meantime, I wanted to share some images of the most recent design to come out of production, something reaching quite a ways outside of my comfort zone, which I often struggle with, but always comes out better than I could imagine.

1
Sketch, slightly underdeveloped.

spin804
spin800
Jeweler’s photographs. 

_36682
img_11074
Client’s photographs.

I always love when clients come up with something that’s out of the ordinary, and this certainly fits the bill in that regard! An unconventional diamond and platinum halo surrounds a 1.69 ct Burmese Red Spinel.

I will be sending a parcel of sapphires and an emerald to AGL for certification this week. I had been intending to send them to AGL and kept putting it off for various reasons. But they are going to go now, and typically they are at about a 2.5 week wait, so hopefully I will have them back relatively soon.

I have been working on some stock items, and as per usual, the CADs came out perfectly the first time for both items. Both share elements with the Vivant and as such, I decided to use Mahenge spinels as them as well. I can’t wait to see them completed!

Elle signature