Evaluating a Neon Pink Red Mahenge Spinel

This week’s blog is an evaluation of a 3.21ct Mahenge spinel that I did for a client recently.  The stone was brought in from Mayer & Watt, a wholesale dealer where the advertised MSRP is $5,256/carat. The following is a direct copy and paste of my email.
color2
Color:
It is always interesting to see how different stones look when up against other stones of similar colors. For this pear, I pulled out the large Mahenge reddish-pink cushion I have, the small Burmese pink-red, a red-red oval, my red spinel band, and my pink-pink Mahenge spinel. So this one is interesting because up against the more pink stones, it looks more red, and when it’s up against a red red, it looks pink. Overall it’s strongly saturated, medium in tone, with the slightest hint of orange when compared to pinks that are more blue-toned.
color-inside
Inside
color-outside
Outside
Inclusions:
My biggest concern going into it was the inclusion. As I think I mentioned in a message I sent you earlier, in some lighting situations, it’s more obvious than in others. Right now it’s about 18 inches from my face, and even though I know where it is, I have difficulty finding it. I think that it would be very close to where a prong would sit to hold it, so once set, it may become even less obvious. I just put it under 14x magnification and it looks as though there is a cluster of 3 bubble inclusions, which are typical for the Mahenge location. They don’t pose any problems for setting, they don’t even come close to reaching the surface. The largest one has a slightly larger cloud around it that’s typically not visible except when backlit, which I have attached a picture of. They are all clear or white inclusions, probably a negative crystal inclusion and two gas bubbles. Even with the three inclusions, I would say that this is a very clean example of Mahenge material.
inclusions
Cut/coloration:
You had asked about zoning earlier. There isn’t any zoning, but as is pretty typical with pear and marquise cuts, the color tends to concentrate on the tips, as a result of the cut. This one is actually pretty evenly colored, with just a slightly deeper color on the tip. As far as cut, this is a really well cut pear. There isn’t any windowing, and there isn’t an abnormal amount of tilt windowing. If anything, I’d say that there is less than the typical amount of tilt windowing.  There does not appear to be any bow-tie or large amount of extinction.
cut
Fluorescence:
It glows a bright red under UV light.
uv-light
Overall I’d say it’s a pretty exceptional stone. The only hesitation I would have would be the inclusion, but that’s really a matter of personal preference – I’m ok with inclusions so long as they aren’t detrimental to the overall look of the stone.
color-comparison color
Elle signature
Advertisements

Gem Blast: Vivant Earrings

If you follow me on social media, you’ve seen these earrings before. They have been all over Instagram, Facebook, and Snapchat.

Inspired by the Vivant necklace, I got the idea when I found these incredible step cut cushion Mahenge spinels, and had to put them together. I then paired them with a pair of Mahenge round brilliant spinels that I had purchased years ago, tweaked a few details to make the combination of stones work together and elongate the shape to flatter the wearer, and added a post back.

A

Showing off a bit of their red fluorescence in the sun.

B

Looking a bit blue, reflecting the sky in the stones.

Some of the finer details:

F
E

Mahenge spinel, diamonds and 18kt white gold.
2.40ctw spinels, .30ctw diamonds, 2.70ctw total stone weight.

close up
D

Finding a pair of spinels is exceedingly difficult because the stones in general are so rare, but to find some that are the same color, size, shape and cut magnifies to difficulty level thousandfold. Finding two pairs that go together and match on color isn’t exactly easy either, and often is a matter of waiting until the right stone or stones comes around.

H up close

Now, the next time you see them, they will be a bit different. A client took a liking to them, but wanted them changed just a touch, and asked me to make the alterations.  I can’t wait to see them when they are done!
Elle signature

One of a Kind

I spent the last week in Albuquerque, New Mexico – the place where I was born and raised. Taking almost an entire week completely off from jewelry and getting back to my roots, spending time with family and friends was one of the most refreshing things I could have done at this point and it gave me some new perspective on things that I’d been dwelling on and feeling stagnant on for too long. I guess that standing in the middle of a thunderstorm in the mountains will help do that to you.

IMG_3440

One of the things that I enjoy the most about gemstones is that they are all unique and one of a kind. Sure, you can get some that look similar to others, but they will always have unique characteristics, whether it’s in the form of color, inclusions, cut, whatever. No two are identical.

34

Working with various colored stone vendors has shown me that I’m not alone in loving gems for this very reason – colored stones are always so different, and sometimes they can totally surprise you with what you fall in love with.

9

So this, my most recent blog, and the first blog in a long time is an ode of sorts to the one of a kind, and an indication on where I am heading creatively. I’m going to take a step back from feeling like I’m treading water coming up with stock designs, and taking a flying leap into the water and swim like my life depends on it – making pieces as unique as the stones they hold.

6

More to come.

Elle signature

What’s in a Name?

What’s in a name?

I get a lot of questions about why I name jewelry what I do, so I thought I should explain a bit more as to how I came to the defining theme in the names of my collection.

14
Vivant – Vivacious

I feel like so many designers out there have chosen names that are ladies given names, and I really wanted to express concepts that would mean something to me, that represented something that I felt, or something that inspired me while I was working on a piece, whether that be something descriptive of the actual piece itself (there could not be another name for Feuilles Dorées) or a name that had some quality that I felt the piece represented. I also try to keep each item upbeat, often thinking of qualities I would like my daughter to possess, or traits that inspirational women in my life embody. Every once in a while I even let a client name a piece themselves.

18
Résistance – Strength

I actually put a lot of time into picking a name for each piece, taking into account every element of the item and every thought, word and feeling that ended up becoming that item. Unless inspiration hits and I fully flesh out an item within a few minutes, many hours of brainstorming, writing down words, drawing, thinking and sometimes staring at a blank piece of paper goes into each item. Often the name for a piece shows up somewhere from the beginning, as one of the defining concepts or an errant thought I have while trying to put a vision into words.

22
Aurore – Dawn

Now, I chose French because of my background in pastry and culinary arts. French is basically the unofficial language of fine dining restaurants (though it could be debated that it should be Spanish) and as a result, I have a decent repertoire of French vocabulary terms floating around in my brain, though they are mostly related to cooking and food! No, I am not French (as far as I know), but I have two close friends that speak it fluently, and when I have questions about correct and accurate language usage, I have people to ask. Besides, French is the language of love, and while it may sound somewhat cliche, I love what I do.

76
Papillon – Butterfly

French is not a super popular language within the United States, I realize that people may struggle with pronunciation, which is why I added what the English translation alongside the French on each piece’s page.  Please don’t feel bad about not being able to pronounce the names – I have struggled with languages my entire life (lets not talk about how I have had years and years of formal Spanish education and can barely speak any of it) and still mangle words at times!

1
Voeu – Wish

So if you have ever wondered, that’s why I have a bunch of French words as the names of my jewelry!

As is par for the course, renovations are not done yet, though there is light at the end of the tunnel! Painting is getting closer and closer to being done, and I should have a new studio by March 1!

In the meantime, I’m working on some custom projects, including some more pear shapes, one of the most challenging but interesting shapes, in my humble opinion. Also included in that is a large project, or parcel of projects that has so many stones, I have been having a hard time figuring out where to start!

I’ve received requests for a new page to be added to my website, one page that has all of my custom work and designs together. Hopefully soon I can put some time into adding that. I will also put another jewelry item to the site in the next couple weeks – the Espoir ring.

New items were added to the etsy shop this past week – a yellow diamond ring and a red spinel and diamond ring among them!

Designing Accolade

I have had a rough week, first I burned my hand while using a heat gun (remodeling) and then when I went to go to bed on Friday night, I thought it felt a bit cold…it was 60 in our house instead of the usual downright tropical 70. Turns out that the heater went out on us, and the heating company isn’t open until Monday. So I’m writing this blog from one of two reasonably not-freezing cold rooms, draped in blankets with a space heater humming away. Thank goodness we still have electricity!

As a result of all of the remodeling (and painting!) I’ve been doing lately, I have barely been wearing any of my jewelry, so I wanted to write about one of my favorite and most popular pieces: the Accolade band.

I often get asked what my biggest seller is, and I would have to say that it’s my Accolade band. I feel like there are a lot of women out there right now who are stacking so many fantastic rings and accenting their engagement rings or any rings with really fun bands, and the texture and versatility of the Accolade certainly lends itself to adding interest to any stack.

Top
The CAD of the flat version.

It originally started out as just a doodle. I had been thinking about all of the writers and word smiths in my extended family, and thought about how pretty the curves of the braces are (curly bracket, curly braces, squiggly bracket, etc) and I really wanted to make something inspired by them. I initially was interested in making it into a halo shape. If you hadn’t noticed, I’m particularly into making halos with unconventional shapes, evidence here, here, here and here.

2

But then as I doodled one day, after the Glacé was made, I realized that if you flip the brace on it’s side, and then alternate it facing upwards and downwards, it created a beautiful series of waves with alternating curves and points. Later, as I studied architectural arches for another project, I would discover the Ogee arch – very similar in shape to the brace, further solidifying my instincts that found the shape beautiful.

3

The flat version was made first, but I had it high polished and plain for the first prototype. While lovely, I thought that it really needed something to add a little bit of dimension and depth to the piece, while not distracting from the lines of the band. So I added milgrain because I thought that the band would go exceptionally well with the outline of the Exalteé halo. But as soon as I had laid eyes on the high polished flat version, I knew that a curved version needed to be made as well, this time with a brushed finish.

4

They are so perfect to add just a little bit of texture with some negative space, and make wonderful wedding bands as well.

My fingers are crossed that I can get back to wearing jewelry soon enough (maybe once I’m done painting?) and one of these bands will be something I reach for first. The Accolade band is available through David Klass Jewelry in many styles and textures, even with diamonds or gemstones!

Are there any questions you’ve ever wanted to ask a gemstone cutter but were afraid to ask? Feel free to submit any questions you may have through me, and they may get answered in an upcoming feature by a wonderful lapidary!

Also, a note: I just renewed a bunch of listings in my shop on etsy! I’m planning on adding a few items there, hopefully this week, including a fancy colored diamond ring, and a red spinel and diamond ring. Feel free to reach out if you’d like to be added to the interest list for either item!

Updates on Jewelry Line

Sometimes I go into Sunday and I realize that I have no idea what kind of blog to post for Monday. And there are sometimes when I’m super organized and have blog ideas or even whole blog entries that are ready to be posted a month into the future. I currently have a bunch of informational blogs that are in the works (at least ten?) but I haven’t had time sit down and write, edit and crop pictures to add to them, so I’m just going to write a bit about what I’ve been up to!

89

I don’t know what is going on, but I’ve hinted around at things a bit on social media. My daughter was going down the stairs earlier this week, when she took a tumble and fell 2/3 of the way down the entire flight. Not to be outdone, my husband tried to jump down the stairs to catch her, and in the process fractured his ankle, while she just has a handful of bruises. So, I have been driving them everywhere and taking care of dogs, cats and the house as well as my usual activities and chores, and my work has been suffering as a result. My husband is finally a bit more mobile, and getting better every day, but most things are still a struggle.

I typically try to avoid working much on weekends, since it’s the only time I really get to hang out with my family, but extenuating circumstances happen from time to time, and you gotta roll with the punches. So, if you have sent me a conversation on etsy or email inquiries, and I am slow to respond, that is why. I will get to everything eventually, it will just take a while longer than normal!

B

Anyway, I have a necklace design and a ring design that are just about finished and out of production. Not sure if I will put the necklace design up onto the site immediately or wait for a bit, but as soon as that ring prototype is in my hands, and photographed, I will get it up on the site, which should be later this week. It’ll be the Aurore setting if you want to be on the look out for it.  I am waiting for two halo ring prototypes to be completed, and again, as soon as those are complete, they will also go straight up onto the site. I’m super excited to share these with you – they have been in the works for so long! If you want sneak peeks of these upcoming items, the place to go would be Instagram, where I tend to post at least 3 images a day of gems I’m playing with, jewelry items, architecture, my animals or pretty flowers – which will likely soon turn into winter scenes!

I am also working on a custom setting for a gorgeous blue-violet spinel cushion, a setting for a large violet sapphire, and just got word that I will be getting some stones in the not-too-distant future for some more custom projects (sounds like earrings and rings). I also had an idea for two pairs of complementary statement earrings that will be fantastic once I can collect all of the stones for them. Oh, and I received some amazing gray spinel pairs from one of my favorite spinel vendors.

Stay tuned! Fun stuff is on it’s way!

D